ROLL

Thursday, May 31, 2012

HOW TO HACK RDP's

Today im sharing u How to Hack Many many Windows VPS.

All u need 2 Softwares called DuBrute and Vnc_scanner to hack VPS.
Download Links :
Vnc_scanner : http://www.mediafire.com/?q8w7waxeajcf6bc#1
Dubrute : http://www.mediafire.com/?dh4ob27iogl6hix

How to Use ?

1) Download both the files from the above link.
2) Extract both the files anywhere in ur pc.
3) Open Vnc_scanner folder
4) Open the exe file called vnc_scanner_gui.exe
[Image: 3URl3.jpg]

5) Select any Country.
6) Click on Get Dial List
After the all ip list Came then :
7) Click on Start Scan
[Image: Y1uGy.jpg]

After that it will scan for VPS working ips.
[Image: cBbGq.jpg]

After Scan finished click on Start parser.It will save good ips in new text file called IPs.txt.

Now u need to get the usernames and Passwords for Scanned ips.For that u have to use one of the hacking software called Dubrute.

1) Open Dubrute folder
2) Copy the IPs.txt file from vnc_scanner folder and paste in Dubrute folder
3) Open the DUBrute.exe
[Image: G1sHn.jpg]


4) Click on Generation
5) Check the image below.
[Image: KpTZH.jpg]

1st click on File ip then select the text file called IPs.txt and Open
2nd Select File Login then Open and then File Pass and Open.
3rd ,Click on Make and Press Ok.
Then Click on Exit

Now press Start in ur Dubrute.

Let it brute the combinations.When a working VPS which match IP , Username and Pass , it would be saved in Dubrute folder File called good.txt
http://i.imgur.com/kUanS.jpg
In this Image shows that I found 3 VPS which is working.

Note : Both the files has Virus.Ur anti-virus detect as Trojan etc.So when u download ,if ur anti-virus active then it will delete ur files.If u want to use then u have to turn off ur anti virus.Or u can hack vps with a VPS like me.I downloaded THese files on a VPS and hacked it ;P.These soft i used to hack VPS from last 1-2 weeks.I hacked around 100 working VPS.

This is a Detailed Tutorial about How to hack VPS ?.Should u have more doubt on this , feel free to reply here.am here to help u.
PS: Am posting at Garena section to let every members see and learn how to do it.I hope No1 against this.If neccessary , ill Move the thread

Thanks and Good Luck to all for hack many many VPS.

How to use VPS

Go to Start > Run > Type mstsc and press OK
Then put ur VPS ip and Connect.Then Type ur ID and pass then OK
Thats it.U are into the Virtual Private Server

How to Change Pass of VPS?
Press Ctrl + Alt + End u will see the option for Change pass.
Note : U could change pass if only u have the permission from the Administrator.

Wednesday, May 16, 2012

Cmd hacking commands

Cmd hacking commands


I am Sure u guys Know All these commands.... I want to Help The Beginers.. So i am Posting This....

Useful Things to do on CMD!

First, open your Network Connection and right click and select Properties. Then Select TCP/IP and click on Properties again. Now Click on Advanced and WINS tab. Select Default for NeBIOS.

Now back to the main Local Area Connection window, select File and Print Sharing for Mic*ft Networks and hit enter.

This is just to make sure you have NetBIOS enabled. We will have some fun with NetBIOS on CMD.

First thing you need to know is some very helpfull commands to use on CMD(Command Prompt).

In case you don't know how to get CMD open in your box, then click on Start, then Run, then type "cmd" (no quotes, off course... you know the drill).

Back to commands:

nslookup
net view
net use
net user
ping
tracert
arp
route
nbtstat
netstat
ipconfig

In case you don't know some of them, then just type the command on CMD and hit enter. A little help will show up in your screen. Read it and understand what the command does.

Lets start easy...

1) ping : This command will allow you to know if the host you pinging is alive, which means if it is up at the time of executing the "ping" command.

ping x.x.x.x (x is the IP address)

or

ping http://www.whatever.com (http://www.whatever.com is the website you want to ping, but you don't know the IP)

OBS: Keep in mind that if the host you pinging is blocking ICMP packets, then the result will be host down.

2) nslookup : This command has many functionalities.
One is for resolving DNS into IP.
Lets say you know the website URL but you don't know its IP(and you want to find out).

nslookup http://www.whatever.com (http://www.whatever.com is the website you want to find out the IP)

Now, another really nice function of nslookup is to find out IP of specific Mail Severs

nslookup (enter)
set type=mx (enter)
yahoo.com

This command will give you the mail server IP of yahoo.com. You can use whatever server you want and if it is listed on DNS, then you get the IP. Simple, isn't it?

OK, now why would you want to have an IP of a mail server?
To send spoofed mail to your friends or even for SE.
In case you looking for "How to spoof email", then look for my "How to spoof email tutorial" http://www.infowar.com/forums/showth...&threadid=2360

3) tracert : This command will give you the hops that a packet will travel to reach its final destination.

OBS: This command is good to know the route a packet takes before it goes to the target box.

tracert x.x.x.x (x is the IP address)

or

tracert http://www.whatever.com (http://www.whatever.com is the website you don't know the IP)

4) arp : This command will show you the arp table. This is good to know if someone is doing arp poisoning in your LAN.

arp -a

5) route : This command will show you the routing table, gateway, interface and metric.

Code:
route print


6) ipconfig : This command will show tons of very helpful things.
Your IP, gateway, dns in use.

Code:
ipconfig
or

Code:
ipconfig /all

this command will give all that info but for all networks you might have it.

Also, in case you have a dynamic IP and want to change it, then type...

Code:
ipconfig /release (this will release your IP)

ipconfig /renew (this will renew your iP)

OBS: Keep in mind that those commands will change your IP, but the new IP will still be tighed up to you. So don't do anything stupid.

7) netstat : This command will show you connection to your box.

Code:
netstat

or

Code:
netstat -a (this will show you all the listening ports and connection with DNS names)
netstat -n (this will show you all the open connection with IP addresses)
netstat -an (this will combined both of the above)

net view x.x.x.x or computername (will list the available sharing folders on the target box)


Now some hints:

Code:
net use \ipaddressipc$ "" /user:administrator

(this command will allow you to connect to the target box as administrator)

Now if you want to connect to the target box and browse the entire C drive, then use this command:

Code:
net use K: \computernameC$
(this will create a virtual drive on your "my computer" folder)

OBS: Keep in mind that this will only works if the target box doesn't have an administrator password set.

And least but not last, the "help" command.

Quote:
whatevercommand /help

or

Quote:
whatevercommand /?


This command will help you to understand what it does and all the switchs available for each command.
Very useful if you know the command, but forgot the right switch.

Saturday, May 12, 2012

Hacking Facebook ,Gmail account using Backtrack and SET

Hello, friends i am back with a latest post on hacking facebook,gmail accounts using backtrack and social engineering kit.Things you needed are following:---> 1. Backtrack 5 R2 2. Internet connection 3. A brain Now follow all my steps like i am showing in this post:----->
1. First open the social engineering kit using this command in cd /pentest/exploits/set and then press enter and then type ./set and hit enter like in image.

2. Now type 1 to select Social-Engineering Attacks and hit enter as in image.
3. Now type 2 to select Website Attack Vectors and hit enter as in image.
4. Now type 4 to select Tabnabbing Attack Method and hit enter.
5. Now type 2 to select Site Cloner and hit enter.
6. Now enter the site address whom which you want to create fake pages.
7. Now ti will start cloning the site. 8. Now send ur ip address as a link to victim.
9. Now when victim click on it he/she get the fake page and when he fill the details he will got hacked. Note : its for educational purpose.

DISCLAIMER

The information provided on hottechtips.blogspot.com is to be used for educational purposes only. The website creator is in no way responsible for any misuse of the information provided. All of the information in this website is meant to help the reader develop a hacker defense attitude in order to prevent the attacks discussed. In no way should you use the information to cause any kind of damage directly or indirectly. The word “Hack” or “Hacking” on hottechtips.blogspot.com should be regarded as “Ethical Hack” or “Ethical hacking” respectively. You implement the information given at your own risk.
Related Posts Plugin for WordPress, Blogger...

Share

Twitter Delicious Facebook Digg Stumbleupon Favorites More