Cracking WPA/WPA2 – PSK Encryption

  • A little Disclaimer – The contents of this post are solely for ethical and educational purposes. You may not use it for unethical purposes. The Author or the Website is not responsible for any damage to yourself, your network, or the computers in you network, should something go wrong. (Basically guys, be careful where you use this and please don’t do anything stupid.)
We’re going to start with a little introduction to Kali Linux, because that is the OS I prefer, is the easiest for this task and comes with all the tools we need. “Kali” is a Linux distribution and is the successor to the much acclaimed Backtrack, which many of you reading this article will probably know of. Now, there are many ways of installing and using Kali, if anyone needs any help, leave in the comments, and I will probably write another post about installing and its basics in the future.
In this tutorial, I’m going to hack into a Wi-Fi hotspot that I just set up, named – Anonymus.
Now, given that we have Kail Linux, open up a terminal window, type in “ifconfig “. This is going to list all the networking interfaces connected to your device.
Here, we only need (wlan0) which is our Wi-Fi card, so we can disable the others by doing “ifconfig <name of the interface> down”.
(“lo” does no matter)…
Selection_002
Now, we type “airmon-ng start wlan0”
(airmon-ng is just a tool for monitoring air traffic, “start” basically starts the tool, and “wlan0” specifies the interface we are using for monitoring)
It’ll probably show “some processes that could cause trouble”, we’ll simply kill those processes by entering “kill <process ID>”.
Now if we do “ifconfig”, it should show us the newly made monitoring interface “mon0”.
Then, put in, “airodump-ng mon0”.
In the screenshot below, the highlighted bssid is our target (and it is my own), named “Anonymus”, the channel is 13 as we can see under the “CH” column.
For our next step we type in, “airodump-ng –c <channel> -w <name> –bssid <bssid> mon0”.
Selection_007
Let me explain a few things here, “airodump-ng” is a tool for capturing Wi-Fi packets, “<channel>” means the channel your target is running on, “-w” basically writes a file by the name that succeeds it in “<name>”, (I did “handshake” just for the convenience of it) bssid is a string of numbers specific to a hotspot.
Now, open up a new terminal and type in “aireply-ng -0 0 –a <bssid> mon0”, this command send a deauthentication signal (usually called a deauth packet) to all the devices connected to that hotspot. Then after a few seconds we stop it by “Ctrl+C”. Now, as we can see, the other terminal shows that the WPA Handshake was successfully captured.
We can close both windows at this point, and open a new one. Type “ls”; that should list the files in the current directory. We can clearly see that the files from the above operation are present. But we only need the file ending with “-01.cap”.
Then we do, “aircrack-ng –w <full location of the wordlist> <the file name>”.
You may be asking what wordlist? What is that sh*t?
A Wordlist is a file containing thousands of known and possible passwords, which you can download from the internet (“specifying from the internet” – We ain’t dumb, boy! :P). The one I used can be found here. The list contains 982,963,904 words exactly all optimized for WPA/WPA2. Would also just like to point out that this is not my work, I got it from forums.hak5.org. It was a guy who compiled a whole load of useful lists, including his own to come up with 2 lists (one is 11gb and one is 2gb) I will be seeding this torrent indefinitely since it is shareware and awesome!
It will then start searching for matching keys in the word list. Now the time that this will take is solely dependent on the strength of the password. The stronger the password the more time will it take. For very strong passwords, check this out. For tips on creating your own strong password – Top 10 Tips to Create a Strong Password
After completion it looks something like the screenshot below. In it, you can see that it tested 45688 keys and my key was the 45689th. I purposely put futurama because frankly, futurama is awesome! Also it is a very weak password (People reading this, if your password is “futurama”, you’re cool! The Hell? Change it right now!)
Now that we know the password, lets test it…
Annnnd… Voila! it works!
Knowing this you will be…
But beware, don’t use it on a Lannister… (Because a Lannister always pays his debts :P)
For those of you who didn’t understand that reference, #GameOfThrones!
Share:

How Amazon Employee bought 'Google.com' Domain for Only $12 from Google


buy google domain
Difficult to believe this, as we hardly come across such news.

But trust me, a person managed to buy no ordinary .com domain, but — Google.com and that too for one whole minute.

Sanmay Ved, an ex-Google employee and current-Amazon employee, experienced something of a shock when he found that the world's largest search engine website, Google.com, was "available" for purchase.

What's Even More Shocking?


It's the cost of the most-trafficked domain in the world — Only $12.

Expecting to get an error message, Ved added the domain to his shopping cart and made payment. The entire purchasing process went through without any difficulty.

Within moments, his inbox and Google Webmaster Tools were flooded with webmaster related messages confirming his ownership for Google.com.
"The scary part was I had access to the webmaster controls for a minute," Ved said.
However, soon he received an order cancellation email and refund from Google Domains, as Google personally owns Google Domains, so it can still control all purchases made through it and revoke them if needed.

Google Forgot to Renew Ownership. Really?

google-domain-buy.png
It is still unclear what exactly happened – if it was due to a bug in Google Domains or the company really "forgot" to renew ownership of its address using its own domain service.

Whatever the reason, the experience of owning the search engine giant Google.com does indeed sound great.

Ved has posted all the ordeal along with screenshots on his LinkedIn account blog post.
Share:

Windows 10 Wi-Fi Sense Explained: Actual Security Threat You Need to Know


Windows 10 Wi-Fi Sense Explained: Actual Security Threat You Need to Know
Just one day after Microsoft released its new operating system, over 14 Million Windows users upgraded their PCs to Windows 10.

Of course, if you are one of the Millions, you should aware of Windows 10's Wi-Fi Sense feature that lets your friends automatically connects to your wireless network without providing the Wi-Fi password.

Smells like a horrible Security Risk! It even triggered a firestorm among some security experts, who warned that Wi-Fi Sense is a terrible and dangerous feature and that you should disable it right away.

Even some researchers advised Windows 10 users to rename their Wi-Fi access points.

Before discussing the risks of Wi-Fi Sense, let's first know how it works.

How Windows 10 Wi-Fi Sense works?


Windows 10 Wi-Fi Sense feature allows you to share your Wi-Fi password with your friends or contacts, as well as lets you automatically connect to networks that your friends and acquaintances have connected to in past, even if you don't know the password.

Now, when those friends are within the range of your Wi-Fi network, Windows 10 automatically joins the network with that saved password you just shared with your friends and logs them in, without prompting them for a password.

Enabled by Default, but It's not the actual Security Threat, Here's Why:


Wi-Fi Sense feature is enabled by default in Windows 10 to make it easier for users to receive instant access to the Shared Networks by their Friends or Contacts.

But, But, But… did you notice that the feature says "For networks I select..."?

"Enabled by default" doesn't mean your Wi-Fi passwords are automatically going to be shared with your Facebook or Skype contacts by default, unless you won’t manually configure your Wi-Fi Sense settings to share selected network access with any contact group.

Under "For networks I select..." option, you can explicitly control which group of contacts from which social networks get access to which Wi-Fi Network.

Until or unless you do not offer your Wi-Fi password to Wi-Fi Sense, it will not let selected contact group to connect to your network.

This means Wi-Fi password sharing option is OFF for every social network by default.

And of course even if you choose to share your Wi-Fi network with your contacts, Wi-Fi Sense only shares Internet access and not your actual Wi-Fi password.

Why You Should be Scared of Wi-Fi Sense (Actual Security Threat)


Microsoft promoted Wi-Fi sense as:

In simple words, now you don't need to read out loud your Wi-Fi password, character by character when your friends are at your home and want to use The Internet. So similarly, you don’t need to shout across the office or your friend’s house "What’s the Wi-Fi password?"

However:

"If you choose to share with your Facebook friends, any of your Facebook friends who are using Wi-Fi Sense on a Windows Phone will be able to connect to the network you shared when it's in range, You can't pick and choose individual contacts." -- Microsoft FAQ says.

As a general Internet user, I used to accept almost every friend request on the Facebook and also communicate with lots of people on Skype or Outlook. In short, the majority of people in my contact list are whom I don't know personally or trust.

So, If I can't choose any individual contact from my list, then enabling "Network password sharing feature" will share my network access with all my contacts in the selected social network.

Microsoft also Argued:

Neither it allows anyone to access your local resources so that nobody can hunt through your personal files.

However, We know that...

The biggest threat of sharing your Wi-Fi access with everyone on a list is just like you are allowing hackers to position themselves between you and the connection point i.e. Man-in-the-Middle attack.

In such attack scenarios, the hacker can access every piece of information you're sending out on the Internet, including important emails, account passwords or credit card information.

Sitting on the same network, an attacker can also target your machine directly using Metasploit or any other hacking tool.

Ultimately, Windows 10 Wi-Fi Sense probably is not the most secure feature in the world, but it is not that bad either, if in future, Microsoft could allow Windows 10 users to choose individual contacts from a group.

For Now… Should You Stop Using It?


Like many things in life, we have to make a choice between things that make our life comfortable and that provide us absolute security.

AND, if you are concerned more about security, just turn Wi-Fi Sense OFF.

How to Turn Windows 10 Wi-Fi Sense OFF?


To disable Wi-Fi Sense, go to Windows Settings, then Network & Internet and then click "Change Wi-Fi settings," and then "Manage Wi-Fi settings."

From there, you can change a variety of settings. Turn OFF everything under the Wi-Fi Sense heading; disable WI-Fi password sharing with Facebook, Outlook, or Skype; and have Wi-Fi Sense forget the list of known Wi-Fi networks.
Share:

How Spies Could Unmask Tor Users without Cracking Encryption


How Spies Could Unmask Tor Users without Cracking Encryption
The Onion Router (Tor) is weeping Badly!

Yes, Tor browser is in danger of being caught once again by the people commonly known as "Spies," who's one and only intention is to intrude into others’ network and gather information.

A team of security researchers from Massachusetts Institute of Technology (MIT) have developed digital attacks that can be used to unmask Tor hidden services in the Deep Web with a high degree of accuracy.

The Tor network is being used by journalists, hackers, citizens living under repressive regimes as well as criminals to surf the Internet anonymously. A plethora of nodes and relays in Tor network is used to mask its users and make tracking very difficult.

Any user when connects to Tor, the connection gets encrypted and routed through a path called a"circuit." The request first reaches an entry node, also known as a 'Guard' that knows the actual IP address of the user, and then goes through every hop in the route and finishes off a communication circuit via "exit nodes."

However, in some cases, an attacker could passively monitor Tor traffic to figure out the hidden service accessed by a user and even reveal the servers hosting sites on the Tor network.

Revealing identities without decrypting the TOR Traffic


Recently, Net Security team from MIT and the Qatar Computing Research Institute claimed to find a new vulnerability in the Tor's Guard gateway that can be exploited to detect whether a user is accessing one of Tor's hidden services.

They explained, Tor's Guard Gateways could be masqueraded and the packets coming from the user could be made to travel through attacker’s malicious ‘setup’ node acting as an Entry node.

In a proof-of-concept attack published this week, the researchers described this technique as "Circuit Fingerprinting,"...

...kind of behavior biometric, which includes series of passive attacks, allowing spies to unmask Tor users with 88 percent accuracy even without decrypting the Tor traffic.

This new alternative approach not only tracks the digital footprints of Tor users but also reveals exactly which hidden service the user was accessing; just by analyzing the traffic data and the pattern of the data packets.
"Tor exhibits fingerprintable traffic patterns that allow an [enemy] to efficiently and accurately identify and correlate circuits involved in the communication with hidden services," says the team.

"Therefore, instead of monitoring every circuit, which may be costly, the first step in the attacker's strategy is to identify suspicious circuits with high confidence to reduce the problem space to just hidden services."
The technique nowhere breaks down the layered encrypted route of Tor network, so being encrypted doesn't make your identity anonymous from others.

Does the vulnerability Really utter Truth?


The Tor project leader Roger Dingledine raises a question to the researchers asking about genuineness of the accuracy that the Traffic fingerprinting technique delivers....

... leaving the researchers and the users confused.

As for the Tor, it is considered to be a popular browser that protects your Anonymity while accessing the Internet. However, with the time and successful breaches, it seems that this phenomenon of the Tor network could get depleted.

According to the MIT News article, the fix was suggested to Tor project representatives, who may add it to a future version of Tor.
Share:

Make Single Name Account On Facebook

Today, Facebook is a biggest social media site with millions of daily users. As per rule, it is not possible to make single name account on facebook, without enter the last name on facebook profile because it is against the facebook policies. I have a trick to make single name account on facebook without using the last name.
Do you know, Indonesians are officially allowed to have single name on facebook as most of the people on Indonesia have only one name and that’s why Facebook allows them to have the single name.
Note:- After few months of successful working of this trick, now few days back facebook starts blocking IP Address for many countries. So i don’t guaranteed about it, So please try it i hope its may work at your place. You can make single name account only if your profile name limit is not exceeded.

How to Make Single Name Account on Facebook :-

If you want to make single name account on Facebook follow my given steps,
(This trick is working for Mozilla Firefox/Chrome but i’m using Mozilla Firefox)
Step 1: First of all, Open Mozilla Firefox browser, click on Tools > Options >Advanced > Network> Settings, and select “Manual proxy configuration” and then change the browser’s proxy from below given:
HTTP: 119.252.160.34
PORT: 8080

Or
Choose any Indonesian proxies from Here
Step 2: Then, Save Settings.
Step 3: From your Mozilla Firefox browser, open your facebook account and go to “General Account Settings“.
Step 4: Change language settings to “Bahasa Indonesia“.
Step 5: Then simply remove your Last Name And Save it.
Step 6: Now Change back your Language settings from “Bahasa Indonesia” to “English (US)“.
Step 7: After completing all steps remove “Manual proxy configuration” in Firefox Settings and select “Use system proxy setting“
So finally in this way you make a single name account on Facebook. If you face any problem feel free to share comments, thanks for reading this post. Don’t forget to share !
Share:

DISCLAIMER

The information provided on hottechtips.blogspot.com is to be used for educational purposes only. The website creator is in no way responsible for any misuse of the information provided. All of the information in this website is meant to help the reader develop a hacker defense attitude in order to prevent the attacks discussed. In no way should you use the information to cause any kind of damage directly or indirectly. The word “Hack” or “Hacking” on hottechtips.blogspot.com should be regarded as “Ethical Hack” or “Ethical hacking” respectively. You implement the information given at your own risk.